Figure 3-29
Cabling for Ceiling Mounting
Mounting
NOTE
If the speed dome is installed to the wooden wall, use the self-tapping screws to secure the mounting base.
If the dome is installed to the cement wall, drill three Φ5 screw holes onto the wall according to the holes
location, and then secure the mounting base to the wall with expansion screws.
Steps:
Step 1
Use the mounting base as a template to mark four screw holes onto the ceiling. If you route
cables from the top of the back box, mark the cable hole on the ceiling and drill a hole.
Step 2
Secure the mounting base to the ceiling with set screws.
Figure 3-30
Secure the Mounting Base
Step 3
Install the speed dome to the mounting base.
IPC6512-Z30&6522-Z30&6622-Z30
Installation Guide
3 Installation
Issue 02 (2014-12-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
22
