1.
Route the cables for the speed dome. Align the bottom of the speed dome with the mounting
base.
2.
Line up the direction of arrow with the spring end of the mounting base.
3.
Push the speed dome upwards and then forwards in the direction of arrow. When the speed
dome is placed in position, the spring will automatically snap into the lock clip firmly.
Figure 3-31
Attach the Back Box to the Mounting Base
----End
3.3.3 Pendant Mounting
Step 1
Drill four φ8 holes in the ceiling according to the screw holes of the mounting base, and then
insert M8 expansion screws (not supplied) into the holes.
Step 2
Pull the power cable, video cable and control wire through the cable hole of the mounting base.
Step 3
Attach the mounting base to the ceiling by aligning the screw holes of the mounting base with
the expansion screws on the ceiling.
Step 4
Secure the mounting base by using nuts and washers to tighten the four expansion screws.
Figure 3-32
Install the Mounting Base
IPC6512-Z30&6522-Z30&6622-Z30
Installation Guide
3 Installation
Issue 02 (2014-12-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
23
