eSpace EGW1500E Enterprise Gateway
Quick Start
3 Product Function Configuration
Issue 03 (2011-12-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17
Table 3-10
Parameter description (3)
Parameter
Description
Internal No
The internal number is used for the calls between intra-office
subscribers.1-30 digit number, which can be user-defined. It cannot
conflict with any service prefixes, emergency numbers, outer-office
numbers, or other intra-office numbers.
User Name
A string of 1-64 characters, which can be user-defined. For example, Jack.
Authenticatio
n
Authentication mode used when a SIP user registers with the EGW1500E.
The value must be the same as that set on the SIP terminal.
Password
Authentication password used when a SIP user registers with the
EGW1500E. The value must be the same as that set on the SIP terminal.
Registration
Group
Registration group used when a SIP user registers with the IMS or NGN.
NOTE
If the required registration group does not exist, choose
Voice > SIP Server
, and
click the
SIP Group
tab to add it.
External No
External number of the user, which is used for outgoing and incoming
calls. It is provided by the carrier. This parameter is valid after you set the
Registration Group
parameter. The external number cannot conflict with
any service prefixes, emergency numbers, outer-office numbers, or other
intra-office numbers.
NOTE
Registration Group
bound to
External No
must correspond to
Sip Trunk ID
. If
Sip Trunk ID
starts with +, you need to to 00 when you configure
External No
.
Digitmap
A dialing rule, which determines whether the range and length of the
dialed number comply with the dialing rule. This parameter is valid after
you set the
Registration Group
parameter. The EGW1500E allows users
to dial numbers that are defined in the digitmap to make calls quickly. If
the dialed number length is the same as that defined in the digitmap, the
EGW1500E stops collecting digits and initiates the call, which reduces the
connection duration. Use the default settings. To customize the settings,
see the
eSpace EGW1500E Enterprise Gateway Product Documentation
.
User State
User status.
IP Address
IP address of the IP phone on the LAN.
----End
Add POTS users
Step 1
On the web management page, choose
Voice
>
Phone Allocation
from the navigation tree.
Click the
POTS User
tab page.
Step 2
Click
.