eSpace EGW1500E Enterprise Gateway
Quick Start
3 Product Function Configuration
Issue 03 (2011-12-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18
Figure 3-9
Adding POTS users
Step 3
Perform configurations according to
Table 3-11
. Click
to save the settings.
Table 3-11
Parameter description (5)
Parameter
Description
Port
Port number used by the common phone to access the EGW1500E. Value
1
indicates the PHONE1 port on the EGW1500E, value
2
indicates the
PHONE2 port, and the rest can be deducted by analogy.
NOTE
You are advised to use the PHONE1 port becuase it supports the power-off survival
function.
Internal No
The internal number is used for the calls between intra-office
subscribers.1-30 digit number, which can be user-defined. It cannot
conflict with any service prefixes, emergency numbers, outer-office
numbers, or other intra-office numbers.
User Name
A string of 1-64 characters, which can be user-defined. For example, Jack.
Registration
Group
Registration group used when a POTS user registers with the IMS or
NGN.
NOTE
If the required registration group does not exist, choose
Voice > Sip Server
, and
click the
SIP Group
tab to add it.
External No
External number of the user, which is used for outgoing and incoming
calls. It is provided by the carrier.This parameter is valid after you set the
Registration Group
parameter. The external number cannot conflict with
any service prefixes, emergency numbers, outer-office numbers, or other
intra-office numbers.
NOTE
Registration Group
bound to
External No
must correspond to the trunk ID. If the
trunk ID starts with +, you need to to 00 when you configure
External No
.