eSpace EGW1500E Enterprise Gateway
Quick Start
1 Planning and Preparation
Issue 03 (2011-12-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
1.2 Checking the Installation Environment
Before installation, check the installation environment.
Table 1-1
lists the major check items in the installation environment.
Table 1-1
Major check items in the installation environment
Item
Requirement
Damppr
oof
Working humidity: 5%–95% relative humidity (RH), no condensing. The
dehumidifier devices such as air conditioners with the dehumidifier function and
special dehumidifiers must be installed in the equipment room where the
relative humidity is higher than 95%. Water seepage, dripping, and dew
producing are forbidden in the room.
Dustpro
of
If the equipment room is close to a dust source, such as a coal mine, a country
road or a farmland, install aluminum alloy windows and fireproofing doors.
Lightpr
oof
Place the device in an environment without direct and strong sunlight.
Interven
tion-pro
of
Prevent the device from other RF devices within 50 meters. Place the device at
the center of the working area by considering the WLAN coverage range. Install
the antennas vertically to get the best WLAN performance.
AC
power
In the equipment room, a stable AC power supply that meets the power
requirements of the equipment must be available.
Heat
dissipati
on
Place the device in an environment with good ventilation and without heat
sources. Leave more than 10 cm space for heat dissipation at the top and all four
sides of the device.
1.3 Unpacking Check
You need to check the received equipment according to the packing list and check whether all
the materials (such as hosts, cables, and CD-ROMs) are complete and undamaged.If any
material is damaged or lost, contact the local merchant.
Table 1-2
Packing list
Item
Quantity
Remarks
eSpace EGW1500E including
antennas
1 -
Power supply adapter
1
-
Straight-through network cable
1
A straight-through network cable is 2
meters long.
Swell fixtures
2
Swell fixtures are used to install the
EGW1500E on the wall.