6 Data Services
28
Receiving a Fax
1.
Set the
Fax Rx mode
at the phone side as follows:
1) Press
Menu
to select
Settings
/
Data modem
/
Fax
/
Data
Rx mode
.
2) Press
for any of the following:
z
Select
Off
(default), and you cannot receive fax or data. The phone regards
the next call as a voice one.
z
Select
Fax until next call
, and the phone regards the next call as a fax.
Upon receipt of a call, the phone automatically sets Fax/Data Rx mode
back to
Off
.
z
Select
Fax until powered off
, and the phone regards all the incoming calls
as faxes before power-off. After you power on the phone, the phone
automatically sets Fax/Data Rx mode back to
Off
.
3) Press
Select
to
confirm the selection.
2.
Run the fax software on the PC, for example, VentaFax or software
embedded into Windows XP.
3.
Send pictures from the PC to the fax at the other end, either a PC fax or an
analog fax.
4.
The fax at the other side, either a PC fax or an analog fax, can send faxes
to the PC fax.
Sending Asynchronous Data
You do not need to set your phone when sending asynchronous data. Make sure
the USB data cable between the PC and your phone is well connected. Send the
data from the PC with hyper terminal software loaded.
