manualshive.com logo in svg

Huawei 3010, Руководство по устранению неисправностей

Поделиться
Скачать
Huawei 3010 Скачать руководство пользователя страница 43

NO TE

The current environment uses IPv4 addresses. You do not need to set the IPv6 address.

Step 4 Run the supportsave command on the CLI to collect logs.

1. Run the following command to save logs to the SFTP server.

FC_SW:admin> supportsave

This command collects RASLOG, TRACE, supportShow, core file, FFDC data 

and then transfer them to a FTP/SCP/SFTP server or a USB device. 

This operation can take several minutes. 

NOTE: supportSave will transfer existing trace dump file first, then 

automatically generate and transfer latest one. There will be two trace dump 

files transferred after this command. 

OK to proceed? (yes, y, no, n): [no] y

2. Set the log collection parameters as prompted and start log collection.

–

Host IP or Host Name: specifies the address for storing logs on the

target device (the SFTP server IP address).

–

User Name: specifies the username for logging in to the target device

(the SFTP server username).

–

Password: specifies the password for logging in to the target device (the

SFTP server password).

–

Protocol: specifies the transfer protocol. Set this parameter to sftp.

–

Remote Directory: specifies the directory for storing log files on the SFTP

server. Create the /support directory in the home directory of the SFTP

server, and set Remote Directory to /support.
(Optional) When "Do you want to continue with CRA (Y/N)" is displayed,

enter n to start collecting logs.

Figure 4-5 Collecting logs

If "SupportSave completed" is displayed, logs are successfully collected.

----End

Huawei Servers

Troubleshooting

4 Collecting Information

Issue 20 (2020-09-25)

Copyright © Huawei Technologies Co., Ltd.

34

Содержание 3010





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды