Huawei 3010 Скачать руководство пользователя страница 114

Страница: 114 / 188

Table 5-20 Quick recovery methods and handling procedures of FC controller

faults

Fault Symptom

Quick Recovery Method

All HBA links are

disconnected.

1. Check the link redundancy status.

● If the links are redundant, reset the switch module

ports connected to the faulty HBAs, and go to

● If the links are not redundant, go to

2. Check whether the ports connected to the faulty

HBAs are functioning correctly.
● If yes, check whether the fault is rectified.
● If no, migrate all services, and safely power off the

server. Next, remove and reinstall the compute

node, and power on the server. If the fault persists,

apply for spare HBAs to replace the faulty ones.

3. Before contacting Huawei technical support, it is

recommended that you migrate services and collect

switch module logs, OS logs, LLD networking

information, and device time differences.

Storage services are

affected but HBA

links are normal.

1. Migrate all services, and safely power off the server.

Next, remove and reinstall the compute node, and

power on the server. Then, check whether the fault is

rectified.
● If yes, no further action is required.
● If no, contact the storage vendor for quick fault

recovery.

2. Before contacting Huawei technical support, it is

recommended that you migrate services and collect

switch module logs, OS logs, LLD networking

information, and device time differences.

Huawei Servers

Troubleshooting

5 Diagnosing and Rectifying Faults

Issue 20 (2020-09-25)

105

Содержание 3010





























































































































































































Результаты поиска

Содержание 3010

Отзывы:

Бренды по названию

Популярные бренды

Huawei 3010, Руководство по устранению неисправностей

Результаты поиска

Содержание 3010

Отзывы:

Бренды по названию

Популярные бренды