HTP MIG 2400, Руководство пользователя

Страница: 5 / 25

5
9
4
7
10
14
3
8
5
6
11
12
13
6. Welding Mode Switch
–
The welding mode switch lets
you select between “seam” welding and “continuous”
welding.
The most common welding mode is the “seam” welding
mode. When you depress the trigger, the machine will weld,
when you release the trigger, the machine stops.
The continuous welding mode is selected when welding
long seams and it is desired not to keep the trigger on
the welding gun depressed. Depressing the trigger and
releasing it will activate the welding machine. The
welding machine will continue welding until the trigger
is depressed and released again. This is very similar to
a "lock-on" trigger on a drill or a grinder.
7. Thermoswitch Indicator Light
–
Your Mig 2400 has a
duty cycle of 35% @ 240 amps and 100% @ 142 amps.
In the unlikely event you have welded long enough to
exceed the duty cycle, the thermoswitch indicator light
will become illuminated.
8. Adapter Flange
– t
he adapter flange houses the adapter
block and is bolted to the front panel of the welder.
9. Adapter Block
– This is where the welding gun connects
to the machine. This single connection houses the power,
welding wire, shield gas, and the trigger wires.
To install the welding gun, simply insert the male central
adapter block (on welding gun) into the female central
adapter block (on welding machine). These will only fit
together in one way. Tighten the adapter nut securely by
hand.
1 2
2400 Front Panel