HTD Lync, Руководство пользователя

Страница: 7 / 28

12 Channel Amp
Lync
*
Zone 1 - Subzone
Media Room
3 Conductor Cable
(or Cat5/Cat6)
Audio Sources
Home Theater Receiver
Satellite Receiver
*
A room with surround sound should be set up separately. Howerever, it can and usually should be connected to the whole house system as a subzone to a nearby zone.
Cat5e Cable
- Subzone
When possible, co-locate your home theater
and whole-house audio equipment.
AMPLIFIER
1 2
+
_
2
AMPLIFIER
1 2
+
_
2
OR
Maximum of TWO 8 ohm speakers per amplifier channel
AMPLIFIER
L
+
_
R
Typical wiring for speakers without an “In-line”
volume control
AMPLIFIER
L
+
_
R
Typical wiring for an “In-line” Volume Control
Controller
Typical wiring of a keypad (Cat5e or Cat6)
RJ45
RJ45
Note: This connection is only used when independant
volume control within a subzone is required
.
Typical wiring of a Source Input Panel
Vol
Vol
3-conductor cable
(or Cat5/Cat6)
6
*
A room with surround sound (i.e. 5.1 or 7.1) will require a home theater receiver which has its own built-in amplification and multiple source
inputs. For this reason, it is not typically set up as a zone on the whole-house audio system. However, it is possible to connect a zone on the
Lync to output to a stereo input on the home theater receiver. In this arrangement, you use the amps in the home theater receiver to power the
zone (or subzone) instead of using two channels on the multi-channel amplifier. It is also possible for sources connected to the home theater
receiver to be shared with the whole-house system. For these two reasons, it is often a good idea to establish your central location in close
proximity to the home theater receiver.
12 Channel Amp
Lync
*
Zone 1 - Subzone
Media Room
3 Conductor Cable
(or Cat5/Cat6)
Audio Sources
Home Theater Receiver
Satellite Receiver
*
A room with surround sound should be set up separately. Howerever, it can and usually should be connected to the whole house system as a subzone to a nearby zone.
Cat5e Cable
- Subzone
When possible, co-locate your home theater
and whole-house audio equipment.
AMPLIFIER
1 2
+
_
2
AMPLIFIER
1 2
+
_
2
OR
Maximum of TWO 8 ohm speakers per amplifier channel
AMPLIFIER
L
+
_
R
Typical wiring for speakers without an “In-line”
volume control
AMPLIFIER
L
+
_
R
Typical wiring for an “In-line” Volume Control
Controller
Typical wiring of a keypad
(Cat5e or Cat6)
RJ45
RJ45
Note: This connection is only used when independant
volume control within a subzone is required
.
Typical wiring of a Source Input Panel
Vol
Vol
3-conductor cable
(or Cat5/Cat6)
Wiring Your Home for the Lync System
*30 foot, 3-conductor cable included for connecting the Source Input Panel to the back of LyncPad. Adapters sold separately for using Cat5 in place of this cable.