19
How to Use
(cont.)
Note
: during setup, if no buttons are pressed for 15 seconds, the LyncPad will automatically save your settings and return to
the LyncPad to its normal operating state.
Adjusting Treble:
Once a feature is selected, use the Volume buttons to increase or decrease treble. Use
the DND button to accept changes and return to the previous settings menu.
Adjusting Bass:
Once a feature is selected, use the Volume buttons to increase or decrease bass. Use
the DND button to accept changes and return to the previous settings menu.
Adjusting Balance:
Once a feature is selected, use the Volume buttons to adjust balance left or right. Use
the DND button to accept changes and return to the previous settings menu.
NOTE
: Balance, Treble, and Bass will only affect the variable output within its zone.
Adjusting MP3 Mode:
You have the ability to determine whether the Lync MP3 player will continously
loop once it has played all available MP3s or whether the player will stop. This fea-
ture is located within the LyncPad Settings Menu. Within the Settings Menu, use the source buttons on the LyncPad to
navigate to MP3 Mode and use DND to select it. Once you are within the MP3 Mode settings use the volume buttons to
select “ON” or “OFF”. Use the DND button to accept changes and return to the previous menu.
Adjusting Font Color and Background Color:
The background and font color on each LyncPad can be individually adjusted. From
within the Settings Menu, navigate to and select the Panel feature. Within the Panel set-
ting menu (see image at right), use the source buttons to navigate up and down to the
appropriate feature, use the volume buttons to adjust the settings for each feature, and
use the DND button to save and return to the previous menu.
NOTE: it is impossible for the Font and Background Colors to be set to the same color.
Adjusting Operation and Standby Brightness:
Once the “Settings Menu” has been reached, use the source and DND buttons to navigate and select the Panel Menu.
Use the source buttons to navigate to the desired setting. Each setting can be adjusted using the volume button and
set using the DND button or simply by navigating to another feature. The “Brightness of Operation” feature is used to set
the brightness of the LyncPad screen during normal operation mode. The “Brightness of Standby” feature is used to set
the brightness of the LyncPad screen once the Lyncpad has gone into “Standby” mode.
Note:
Although the Brightness
of Standby only shows 5 available settings there are actually 6. The final setting being all the way to the left. This setting
actually turns the display screen completely off during Standby mode. Obviously this setting is not available for the Bright-
ness of Operation feature.
Resetting the LyncPad:
The LyncPad can be reset to its factory default settings by navigating to the Panel feature within the settings menu, and
then selecting “ON” next to the RESET option.
Vol
Vol
Source
Zone
Talk
Source In
Power/Mute
DND
Background Color
Brightness of Operation
Brightness of Standby
RESET
5
1
OFF
Font Color
Vol
Vol
Source
Zone
Talk
Source In
Power/Mute
DND
MP3 REPEAT LOOP
ON
Vol
Vol
Source
Zone
Talk
Source In
Power/Mute
DND
BALANCE
