HT PVCHECK, Руководство пользователя

Страница: 47 / 56

PVCHECK 45
5. Use the arrow keys (

,

) and (

,

) with the virtual keyboard
to add a short description (max 13 chars) in the “Comment” field.
Press
ENTER to digit any character of the desired name.
6. Press the SAVE key again to confirm data saving or ESC/MENU to exit without saving.
7.3. OPERATIONS WITH RESULTS
7.3.1. Recalling on the display the PV efficiency results
1. Press the ESC/MENU key to go back to the main menu, select
“
MEM
” and confirm with
ENTER to access the section where
saved values are displayed. The screen to the side is shown by
the instrument and contains the saved tests.
2. Using the arrow keys (

,

) and the arrow key

, select “
Recall
”,
then “
Efficiency
” and confirm with
ENTER to display the results
of test only.
3. Using the arrow key

it is possible to display the following labels:

TYPE
 indicates the type of data saved: “
REC
” for a check
with a precise final result YES/NO, “*
REC
” when the instrument
does not have the irradiance and temperature values recorded
by SOLAR-
02 and “
IST
” for saving the instant conditions on the
display.

DATE

indicates the date and time in which the datum
has been saved in the instrument.

DESCRIPTION

indicates the description provided by the
user when saving the datum.
4.
Select the type of “
SMP
” datum, the item “
Open
” and confirm with
ENTER . The instrument shows the following screen
5.
Select the type of “
REC
” datum, the item “
Open
” and confirm with
ENTER . The instrument shows the screen containing the final
results.
6.
Selecting the “
*REC
” datum type, the item “
View
” and confirming
with ENTER
, the message “Unable to perform analysis” is
displayed due to the irradiance/temperature values recorded by
SOLAR-02 missing.
The partial values of this measurement are
only visible after downloading the data onto the PC (see § 8)
using TopView.
7.3.2. Recalling on the display the results of IVCK, M
Ω
and LOW
Ω measurements
1. Press the ESC/MENU key to go back to the main menu, select
“
MEM
” and confirm with
ENTER to access the section where
saved values are displayed. The screen to the side is shown by
the instrument and contains the saved tests.
2. Using the arrow keys (

,

) and the arrow key

, s
elect “
Recall
”,
then “IVCK” and confirm with
ENTER to display the results of the
I-V curve only.
3.
The field “DATE” indicates the date/time in which the result of
measurement has been saved, the field “TYPE” indicates the type
of test carried out (LOW
Ω, M
Ω
, IVCK).