HST Addressable fire alarm MN-300, Руководство по эксплуатации

Страница: 12 / 26

Page 10
Type: This is used for setting the type of the acting module of the floor through
▲
and
▼
. The linkage
types include:

Broadcast

Air-conditioner

Roll door

Elevator

Water flow displayer

Fire water electromotor

Sprinkler electromotor

Generator

Sprinkler valve

Fireproof door

Fireproof valve

Air in valve

Air in fan

Air Valve

Air out fan

Air out Valve

Valve

Electromagnetic valve

Agent
Register =1, valid; Register =0, invalid.
Updown
floor: This means that neighboring floors act at the same time. “0” means that cross-floor does
not exist; and “1” means that cross-floor exists.
Note: After the setup is finished, press the # key to save the settings and to set the next group, or
press the * key to go back to the previous menu.
4) The User may move the cursor to the Type option and press the # key for setting. The following
content will be displayed.
Type alarm integration refers to a kind of linkage in which a detector or module in the entire system
triggers the actions of another module when giving an alarm or making feedback.
Group No. This refers to the linkage number. There are 30 groups ranging from 01 to 30. Through this
option, the user can view, set or modify the linkage of the groups.
Register =1, valid; Register =0, invalid.
Type: This is used for setting the type of the equipment triggering the linkage through
▲
and
▼
.

Horn/Strobe

Back

Sounder

Broadcast

Air-conditioner

Roll door

Elevator

City power exchange

Fire water electromotor

Sprinkler electromotor

Generator

Sprinkler Valve

Fireproof door

Fireproof valve

Air in valve

Air in fan

Air valve