HSM FP 1500, Руководство по эксплуатации, Страница: 28 / 56

Installation FP 1500
FP 3000
6.817.999.520 Edition 03/2000
5 - 4
5.4 Move cylinder into position
The cylinder is retracted during transport and must be moved into operating position
and connected with dowels and screws before the first compression.
➪
For a better control, unscrew the front cover above the door.
Risk of squeezing
Do not reach into the unprotected parts of the barrel press as long as the
covers are removed.
➪
Press the "Lower press ram" soft-key.
• Ensure that the cylinder end and the hoses which are visible on top of the
machine move up.
• If the cylinder does not move it is possible that the door is open.
➪
Move up the cylinder in several steps.
➪
In the meantime, open the door and check the position of the cylinder flange. Do
not operate under pressure before the cylinder is screwed tight.
Assemblyinformation
The cylinder is not secured against turning. The hydraulic hoses or the
fittings on the cylinder can be damaged whilst moving.
➪
Permanently control the position of the cylinder and the hydraulic hoses.
➪
Press the "Lower press ram "soft-key until the cylinder flange has reached the
upper housing frame.
Stop cylinder movement
Immediately press the "Press ram stop" soft-key when the cylinder
flange has reached the upper housing frame.