HSM FP 1500, Руководство по эксплуатации, Страница: 11 / 56

FP 1500 Safety
FP 3000
Edition 03/2000 6.817.999.520
2 - 3
2.3 Organisational measures
– The Operating Manual must always be available to the personnel.
– All safety and danger information on the barrel press must be kept complete and
legible.
– In addition to the Operating Manual the generally recognised legal and other
binding regulations concerning accident prevention and environmental protection
must be observed.
– The barrel press must not be modified or converted without prior approval from the
manufacturer.
– Only use original spare parts.
2.4 Handling the barrel press
– Always work according to the instructions.
– Before switching on and starting the barrel press, ensure that nobody is jeopardized
by the operation of the barrel press.
– Operate the barrel press only when all protective devices and safety-technical
equipment have been installed and are operative. Do not make any conversions
or modifications on your own initiative.
– In normal operation, open the loading flap and the bale ejection door only when
the hydraulic cylinder is idle.
– Check the barrel press at least once per shift for externally visible damage and
defects.
– Ensure that the barrel press workplace is always clean and safe.
– Immediately shut down and secure the barrel press when malfunctions occur.
– Immediately report any changes in the the operational behaviour to the competent
person. Shut the machine down and secure it, if necessary.
– Wear your personal safety clothes during operation.
– Observe the relevant safety and environmental regulations (e.g. hazardous
material act, waste act, water act) when handling hazardous materials.