HSM FP 1500, Руководство по эксплуатации, Страница: 12 / 56

Safety FP 1500
FP 3000
6.817.999.520 Edition 03/2000
2 - 4
2.5 Maintenance and repair
– Work on the electrical system of the barrel press may only be performed by a
qualified electrician or by instructed persons under instruction and supervision of
a qualified electrician according to the electro-technical rules.
Mechanical maintenance and repair work
➪
Switch off main switch and secure against switching on again.
➪
Pull mains plug.
– Mechanical and hydraulic functional elements must be inspected by qualified staff
for correct function and wear every six months.
– Check whether all protective devices have been re-installed before putting the
machine into operation again after repairs.
Electrical maintenance and repair work
➪
Switch off main switch and secure against switching on again.
➪
Pull mains plug.
– All electrical functional elements and components must be inspected by a qualified
electrician every six months.
– All connecting cables must be laid in such a way that they cannot be tripped over.
– Check whether all protective devices have been re-installed before putting the
machine into operation again after repairs.
Oils, greases and other chemical substances
– When handling oils, greases and other chemical substances observe the safety
regulations which are applicable for these products. The relevant DIN safety data
sheets are provided by the respective supplier.