HSM FP 1500 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 56

HSM FP 1500 Скачать руководство пользователя страница 25

FP 1500

Installation

FP 3000

Edition 03/2000

6.817.999.520

5 - 1

☞

5

Installation

5.1

General information

Qualified personnel

We urgently recommend to have the installation work on the barrel press
performed by trained HSM personnel. We assume no responsibility for
damage arising from incorrect installation work.

Installation site

When determining the installation site consider the space required for maintenance
and inspection work on the barrel press (see Section 3.2).

The barrel press may only be operated in dry locations.

Installation outdoors

Attach a protection against rain water when the barrel press is operated
outdoors. The power supply must fulfill the requirements for installation
outdoors (additional FI protection).

Environmental information

Residual liquid should not come into the earth.
Keep to the environmental regulations

No special foundation is required. Check the carrying capacity of the ground if doubts
exist.

Supply connections

The barrel press is supplied ready for connection with the appropriate connecting
cable and plug.

A suitable CEE socket must be present at the installation site.

«
...
23
24
25
26
27
...
»

Содержание FP 1500

























































Отзывы:

Нет отзывов