HSM FP 1500, Руководство по эксплуатации, Страница: 10 / 56

Safety FP 1500
FP 3000
6.817.999.520 Edition 03/2000
2 - 2
2.2 Selection and qualification of staff
The barrel press employs state-of-the-art technology. However, this machine can
become hazardous if used incorrectly or for purposes other than those for which it
was designed.
– The barrel press may only be operated, serviced and repaired by authorized,
trained and instructed personnel.
– Each person given duties of assembling, dismantling and reassembling and
maintenance (inspection, servicing, repair) of the barrel press must have read and
fully understood the entire Operating Manual, in particular the "Safety" section
before starting to work. We suggest the management obtains written confirmation
in particular from personnel only working occasionally with the barrel press.
– The management has the obligation to instruct the personnel in handling the barrel
press and to create binding instructions. The operating and maintenance personnel
must receive regular training on safety regulations.
– The responsibilities of the staff for assembly, dismantling and reassembling, start-
up, operation and maintenance must be clearly delegated and observed.
– Persons to be trained or instructed may operate the barrel press only under the
permanent supervision of an experienced person.
– The barrel press may not be operated by persons under 16 years of age.
– Work on the electrical system of the barrel press may only be performed by a
qualified electrician or by instructed persons under instruction and supervision of
a qualified electrician according to the electro-technical rules.
– Only persons with specialist knowledge and experience with hydraulics may work
on the hydraulic equipment.