Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 27 -
5.1.0. CHANGING THE BATTERY ADAPTER
In order to mount another battery adapter, proceed as follows:
The charging station must be switched off and the power supply must be
disconnected prior to changing the adapter. Then, the battery which needs
to be changed must be loosened, so that the circuit board of the battery
adapter is accessible.
There are 4 different designs / basic forms of battery adapters. After
loosening the mountings, all 4 designs are removed in the same manner. To
do this, lift the adapter up slightly and pull it out to the top.
Design 1
Rotate the two flathead screws approx. half
a turn.
loosen (CW)
mount (CCW)
WARNING
Only authorized specialists are permitted to change the
battery adapter. For the exchange is no electrical qualified
personnel required.
DANGER
Be careful of sharp edges!
