Im Martelacker 12 – D-79588 Efringen-Kirchen – Phone 0 76 28 - 91 11- 0 – Fax 0 76 28 - 91 11-90
E-Mail: [email protected] – Web: www.hs-technik.com
- 15 -
All common battery types from 3.6 - 50.4 V (43.2 V nominal voltage) such
as Atlas-Copco, Bosch, Fein, Makita, Panasonic, Desoutter, HS-Technik etc.
can be quickly and reliably charged with the HST-MV3 charging station.
3.1.0. BENEFITS
• Battery parameters are
measured and processed
• Special HST frequency
modulation impulse charging
process
®
Anti-memory effect
• Automatic voltage detection
• IFCS - Intelligent Full Charge
System for Li-Ion batteries
• Capacity-based charge
maintenance mode only
for Ni-Cd & NI-MH batteries
• Detection of defective cells
3. COMMISSIONING
• Protection against reverse
polarity
• Can also charge at
temperatures > 40° C
• Adapter can be changed in 2
minutes
• Software update via USB
• Suitable for Ni-Cd, Ni-MH and
Li-Ion batteries
• With PFC (Power Factor
Control)
WARNING
The matching battery adapter and the correct software
and firmware must be mounted/installed to charge the
batteries.