the packing material is critical to secure transportation of the frame in the future.
Shipping or moving the vertical leg subassemblies by any means other than how it
was originally packaged at HRS may result in permanent damage to the unit.
Installation of VXR Adjustable Foot System
- Unwrap two of the four feet
supplied with the unit. Remove the nut and washer from each foot (see Photo 1).
Photo 1
Hand-tighten the nut all the way down on each individual foot. Then back the nut
off one half rotation (see Photo 2).
Photo 2
Place the supplied washer on top of the nut and then screw each of the feet into
the threaded inserts on the bottom of the first vertical leg subassembly (see
Photos 3 & 4). The feet should be threaded into the insert until the washer is held
in contact with the bottom of the leg. (This ensures maximum engagement
between the insert and the foot).
Photo 3
Photo 4
