![background image](http://html1.mh-extra.com/html/optiguard/v-line-series/v-line-series_installation-instructions_1642327001.webp)
Optiguard sp. z o.o.
ul. Aleksandrowska 6-10, 87-100 Toru
ń
NIP 956-213-03-91
Phone +48 56
654 71 33
1 / 5
V-LINE
BACK
INSTALLATION INSTRUCTIONS
SUGGESTED USE
V-line series is the Stand anti-theft protection dedicated to
smartphones and tablets.
The aesthetic product presentation is allowed by two types of
sensors: angled (25°) and flat.
An additional advantage is the possibility of rotation of the sensor by
90°, which allows convenient testing of the product.
Small size assured optimum visibility of the product.
The image below shows the components needed to assemble the
whole system.
1) Stand V-line Back + V-line Back sensor
2) charging cable
3) cleaning tissue with izopropylan
4) USB 5V/2A power supply
5) smartphone
Cleaning tissue with izopropylan assures the proper preparation
of the surface under Optiguard stickers.
WARNING!
After connecting the device to a charger, a periodically blinking yellow diode in the base indicates lack of any programmed remote controls.