INSTRUCTIONS CM281G
© Panduit Corp. 2010
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Page 1 of 4
Modular
N
ET
F
RAME
™
Rack and Accessories
Part Numbers: NFR84, NFD484, NFSK, NFDR4X6K, NFCDRK, NFVSM4, NFEDB23,
NFSHLF19X18, NFSHLF19X25, NFLRB, NFEP, NFD884, NFD1284, NFREB2, NFBRFK
Optional Accessories
NFR84
Modular
N
ET
F
RAME
Rack
(8) D-rings
NFDR4X6K
Rack Assembly
(1) Vertical
Slack Manager
NFVSM4
Step1
Lay the two vertical channels
on the floor or a pair of sturdy
saw horses to ease installa-
tion.
Install (1) Base Angle and
Front Top Flange on the verti-
cal channels using (8) 3/8”
bolts, lockwashers and nuts
provided.
Do not tighten.
19” Mounting
23” Mounting
(2) Vertical Channels
(2) Base Angles
(1) Pack of (20) 3/8x1.00
Bolt, Lockwasher, Nut
(1) Front Top Flange
(1) Rear Top Flange
(2) Center Waterfalls
(1) Pack of (25) #12-24x1/2” Screws
(1) Grounding and Hardware Kit
(16) Center
D-rings
NFCDRK
(1)
N
ET
F
RAME
Extender
Door Brackets for
23” Mtg
(4) #10-32 Screws
NFEDB23
(1) End Panel
(6)3/8”-16x1.625” Hex Bolts
3/8”-16 Hex Nuts
3/8” Split Lockwashers
NFEP
(1) Ladder Rack
Bracket
(2)3/8”-16x1” Hex Bolts
3/8”-16 Hex Nuts
3/8” Split Lockwasher
NFLRB
(1) Shelf
(4) #12-24 Screws
NFSHLF19x18
NFSHLF19x25
(shown)
(1) Door, 4” wide w/
Mtg Brackets
(4) #10-32 Screws
NFD484
(1) Center
Door, with
brackets
NFD884
NFD1284
(2) Rear Extender
Bracket
(8) #12-24 Screws
NFREB2
(8) Bend Radius Fingers
NFBRFK
Vertical
Channel
Base Angle
Front Top
Flange
Step 2
Roll the rack on its side to install
the other base angle and rear
top flange using (8) 3/8” bolts,
lockwashers and nuts provided.
Do not tighten
.
Rear Top Flange
Base Angle
(1) Spool
(2)#12-24 Screws
NFSK
