ERS 4 POINT PHONE/TABLET INSTALLATION
INSTRUCTIONS
Tel: 855-757-2776
scorpionsp.com
2. Insert the blue key into the axle of the Scorpion
(green dot side) and rotate counter-clockwise to
expand the legs wide enough for the device to fit into
the Scorpion.
1. Use supplied blue key to loosen the top and bottom
legs. Insert the key and rotate counter-clockwise to
loosen. Once loose, slide them all the way out.
3. Remove the 3M adhesive covering.
4. Place the device into the Scorpion and ensure that
the leveling plate is aligned in the center of the
device.
5. Press firmly on the front of the device to ensure the
dual lock and leveling plate fully adheres to the device.
6. Tighten the side legs of the Scorpion until they
slightly touch the side of the device by inserting the
blue key into the axle (green stickers side) and
rotating clockwise.
7. Raise the leveling plate by inserting the blue key into
the leveling plate studs. Switch back and forth between
the studs to ensure equal pressure.
NOTE:
Do not over tighten
NOTE:
3 turns and switch until plate is raised
Before installing, use supplied blue key to unlock
Scorpion axle. Unlock by turning counter clockwise.
*IMPORTANT* PLEASE READ BEFORE INSTALLING
