background image

Limited Warranty 

 
Harmonic Resolution Systems, Inc. warrants the product designated herein to be 
free of manufacturing defects in material and workmanship subject to the 
conditions herein set forth, for a period of 90 days from the date of purchase by 
the original purchaser.  If the purchaser registers the unit with Harmonic 
Resolution Systems, Inc. by mailing in the warranty card, together with a copy of 
the bill of sale, within 14 days of the date of purchase, said purchaser would be 
registered for an extended service contract.  The extended service contract 
extends the 90 days to a period of five (5) years from the date of purchase by the 
original purchaser or no later than six (6) years from the date of shipment to the 
authorized Harmonic Resolution Systems, Inc. dealer, whichever comes first.  
This warranty is subject to the following conditions and limitations. 
 

1.

 

This warranty is subject to the following conditions and limitations.  The 
warranty is void and inapplicable if the product has been used or handled other 
than in accordance with the instructions in the owner’s manual, abused or 
misused, damaged by accident or neglect or in being transported, or the defect is 
due to the product being repaired or tampered with or modified by anyone other 
than Harmonic Resolution Systems, Inc.  The product must be packed and 
returned to Harmonic Resolution Systems, Inc. by the customer at his or her sole 
expense.  A written description of the defect and a photocopy of the original 
purchase receipt must accompany a returned product.  This receipt must clearly 
list model and serial number, the date of purchase, the name and address of the 
purchaser and authorized dealer and the purchase price.  Harmonic Resolution 
Systems, Inc. reserves the right to modify the design of any product without 
obligation to purchasers of previously manufactured products and to change the 
prices or specifications of any product without notice or obligation to any person. 

2.

 

Warranty does not cover normal recommended care and maintenance. 

3.

 

Harmonic Resolution Systems, Inc. shall not be responsible in any way for 
consequential or indirect damages or liabilities resulting from the use of the 
product covered herein or resulting from any breach of this warranty or any 
implied warranty relating to said product. 

4.

 

Harmonic Resolution Systems, Inc. shall not be responsible in any way for 
damage to finishes resulting from normal use and exposure to sunlight and the 
environment even within the normal and extended warranty period. 
 

Содержание RXR Audio Stand


















Отзывы: