VDPLAT1
HQ POWER
7
c.
Receiver Output Connections
When installing the receiver it is necessary to calculate the number of
receiver output ports required. This is calculated on the vertical height of
the LED matrix screen in number of rows (H). The figure shows the
receiver output ports J1-J16.
In order to calculate the number of receiver output ports required, please refer to the table below. H refers to the
number or rows (vertical pixels) of the LED matrix screen.
Example: A tile screen of length 12 units (or 12m) would consist of 12 x 8 rows = 96rows. Therefore the receiver
output ports J1to J12 must be connected to the LED floor tile.
