If a standby appliance module is removed, the Image Streamer user interface continues to be accessible.
Guidelines for inserting an Image Streamer appliance
• When an Image Streamer appliance is inserted, it takes
up to 1 hour for the inserted appliance to be ready to operate
in high-availability mode. Do not remove the appliance until the insert operation is complete because it might interrupt
cluster formation. You can track the progress of the insert operation on the
SERVERS > Enclosures screen in HPE
OneView user interface.
• After you insert an appliance, the
SERVERS > Enclosures screen in the HPE OneView user interface displays an alert
about the interconnect link topology with state as
Cleared. This state update might take up to 6 minutes from the
time you insert the appliance.
• After you insert an appliance and cluster formation starts, a quorum configuration alert might appear on the
Deployment Appliances screen in the Image Streamer user interface. Ignore this alert because it is a part of the
cluster formation process. Once the cluster is formed, the alert automatically clears. If this alert stays active for
more
than 30 minutes, contact your authorized support representative.
Appliance management
46