If the Image Streamer appliance has not been claimed by HPE OneView earlier because it was used in a different HPE
Synergy Composer domain or because the Composer has been reimaged, a dialog box prompts you to enter the
credentials. Once you enter the correct credentials that were set in the previously claimed HPE Synergy Composer
domain, the Image Streamer appliance is reset and the claim process is initiated.
NOTE: This action erases the previously configured OS volumes, network settings, and logs.
If you do not know the credentials for resetting the appliance, you must
reimage the Image Streamer appliance.
NOTE: When a factory reset is performed from the Image Streamer maintenance console, the alert link for claiming the
appliance is not displayed in the HPE OneView user interface. From the maintenance console, you must use the REST API
to initiate the claim. You can access the HPE OneView API Reference from the help sidebar in HPE OneView.
When to create a management network for Image Streamer
It can be faster to modify an existing management network to use with Image Streamer than to create a new one.
Therefore, check the management network settings under
Settings > Networking in HPE OneView user interface to see
if any management networks have been defined.
NOTE: Any management network used for Image Streamer must also include the IP address for HPE OneView in its
configuration.
If a management network is defined, but contains only the HPE OneView IP address and no VLAN, it is faster to
delete the management network and then recreate it to support Image Streamer.
If a management network is defined that contains the HPE OneView IP address and a VLAN or other attributes,
modify that management network for use with Image Streamer.
If no management networks have been defined, create the management network for Image Streamer.
For instructions on creating, modifying, and deleting management networks, see
HPE OneView Help for HPE Synergy.
Add Image Streamer to a logical enclosure
NOTE: Complete the following steps for each logical enclosure where you want to include Image Streamer appliances.
Prerequisites
• Privileges: Infrastructure administrator
• OS deployment server must be added for Image Streamer using HPE OneView user interface.
Procedure
1. Go to the SERVERS > Logical Enclosures screen in the HPE OneView user interface.
2. Click Update from Group Action.
NOTE: It takes approximately 50 minutes to add Image Streamer appliances to an existing logical enclosure.
Getting started with Image Streamer
17