HPE ProLiant DL385 Gen10, Руководство по техническому обслуживанию и ремонту

Страница: 96 / 166

CAUTION: To prevent the risk of damaging the pins in the processor socket, do not reinstall the pin field
cover cap after removing it.
c. Hold the lift tabs near the front end of the rail frame, and then pivot the rail frame to the closed position.
A click sound indicates that the rail frame is properly engaged.
5. Close the force frame:
CAUTION: Do not overtighten the screws as this might damage the system board or the processor socket.
a. Pivot the spring loaded force frame downward and hold it down (callout 1).
b. Use a T-20 Torx screwdriver to tighten the captive screws in the sequence shown in the following image
(callouts 2–4).
When using a torque wrench to tighten the screws, apply a torque of 1.58 N ⋅ m (14 lbf-in).
6. Apply new thermal grease to the processor in the pattern shown in the following image. Use the full contents of the
thermal grease syringe.
96
Removal and replacement procedures