HPE ProLiant DL385 Gen10 Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 166

background image

notifications about the status of the server are sent based on your alert settings. The system errors and events are
recorded and displayed in an event log file. You can also import or clear foreign configurations.

IMPORTANT: Limited alerting and monitoring is available through iLO when HPE Agentless Management
Service is installed. The HPE Smart Array P824i-p MR Gen10 controller supports limited alerts through iLO
using the AMS agent.

•

Maintaining: Using MR Storage Administrator, you can perform system maintenance tasks, such as updating the
controller firmware.

•

Troubleshooting: MR Storage Administrator displays information related to drive failures, device failures, and other
issues. It also provides recommendations and displays contextual links, helping you to locate the drives/devices that
have issues and troubleshoot them. You can also download a report of the devices and their configurations, properties,
and settings and send it to Hewlett Packard Enterprise Support for further troubleshooting.

Obtain MR Storage Administrator installation files through the Service Pack for ProLiant, or SPP, which you can download
from the Hewlett Packard Enterprise website (

https://www.hpe.com/servers/spp/download). Be sure to use the latest

SPP version for the server.

For more information about the MR Storage Administrator, see MR Storage Administrator User Guide on the Hewlett
Packard Enterprise website (

https://www.hpe.com/info/P824i-pdocs).

HPE InfoSight for servers

The HPE InfoSight portal is a secure web interface hosted by HPE that allows you to monitor supported devices through a
graphical interface.

HPE InfoSight for servers:

• Combines the machine learning and predictive analytics of HPE InfoSight with the health and performance monitoring

of Active Health System (AHS) and HPE iLO to optimize performance and predict and prevent problems

• Provides automatic collection and analysis of the sensor and telemetry data from AHS to derive insights from the

behaviors of the install base to provide recommendations to resolve problems and improve performance

For more information on getting started and using HPE InfoSight for servers, go to:

https://www.hpe.com/info/

infosight-servers-docs.

StorCLI

The Storage Command Line Interface (StorCLI) tool is the command line management software designed for the HPE
Smart Array MR controller. StorCLI is a command line interface that is designed to be easy to use, consistent, and easy to
script.

Obtain StorCLI through the Service Pack for ProLiant, or SPP, which you can download from

https://www.hpe.com/

servers/spp/download. Be sure to use the latest SPP version for the server.

For more information about StorCLI, see StorCLI User Guide on the Hewlett Packard Enterprise website

www.hpe.com/info/P824i-pdocs.

106

Diagnostic tools

«
...
104
105
106
107
108
...
»

Содержание ProLiant DL385 Gen10







































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL385 Gen10

Express5800/T110g-E

Бренд: NEC Страницы: 2

Бренд: F5 Страницы: 72

Бренд: U.S. Converters Страницы: 5

Бренд: Sun Microsystems Страницы: 128

Бренд: Crown Страницы: 12

Бренд: IBM Страницы: 56

System x3350 Type 4192

Бренд: IBM Страницы: 84

Бренд: ioCorp Страницы: 18

NetScaler MPX 25100 40G

Бренд: Citrix Страницы: 15

Mobileraid MR8X

Бренд: Sans Digital Страницы: 81

Бренд: Qeedji Страницы: 58

Бренд: TYAN Страницы: 77

Бренд: Huawei Страницы: 39

Бренд: Huawei Страницы: 188

5288 V3 V100R003

Бренд: Huawei Страницы: 297

Бренд: Huawei Страницы: 2

VGF-HS1 - Vaio Home Server

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды