HPE ProLiant DL385 Gen10, Руководство по техническому обслуживанию и ремонту

Страница: 42 / 166

For more information, see NVMe SSD LED definitions.
3. Remove the drive:
a. Push the Power button.
The Do Not Remove button illuminates and flashes.
b. Wait until the flashing stops and the Do Not Remove button is no longer illuminated.
c. Push the Do Not Remove button and then remove the drive.
To replace the component, reverse the removal procedure.
Removing and replacing an M.2 SSD
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack.
•
Remove the server from the rack.
4. Remove the access panel.
5. Remove the primary riser cage (Removing and replacing the primary or secondary PCIe riser cages).
6. Remove the M.2 SSD.
42
Removal and replacement procedures