HPE OfficeConnect 1850 Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 97

background image

© Copyright 2016 by Hewlett Packard Enterprise Development LP
The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products
and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or
omissions contained herein.
Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent
with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commer-
cial Items are licensed to the U.S. Government under vendor’s standard commercial license.
Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control
over and is not responsible for information outside the Hewlett Packard Enterprise website.

Acknowledgments

Microsoft

®

, Windows

®

, and Windows NT

®

are US registered trademarks of Microsoft Corporation.

Java and Oracle are registered trademarks of Oracle and/or its affiliates.

Revision History

Open Source Code Notice

This product includes code licensed under the GNU General Public License, the GNU Lesser General Public License, and/or certain
other open source licenses. A complete machine-readable copy of the source code corresponding to such code is available upon
request. This offer is valid to anyone in receipt of this information and shall expire three years following the date of the final distribu-
tion of this product version by Hewlett Packard Enterprise Company. To receive the CD, HPE charges a small fee in order to cover
the actual costs of manufacturing and shipping the CD.
Requests for Open Source Software should be emailed to

[email protected]

.

Please specify the product and version for which you are requesting source code.

Warranty

For the software end user license agreement and the hardware limited warranty information for HPE Networking products, visit

http://www.hpe.com/support/Networking-Warranties

.

Applicable Products

HPE OfficeConnect 1850 6XGT 2XGT/SFP+ Switch

JL169A

Revision #: Initial Release

Date: September 2016

«
1
2
3
4
...
»

Содержание OfficeConnect 1850 Series


































































































Отзывы:

Нет отзывов

Похожие инструкции для OfficeConnect 1850 Series

Бренд: Daxten Страницы: 7

Бренд: Pakedge Страницы: 24

Бренд: UNICOM Страницы: 1

SMALL OFFICE CyberSwitch 150

Бренд: Cabletron Systems Страницы: 106

Sierra Pro XL 1616V3

Бренд: Kramer Страницы: 2

Бренд: BluStream Страницы: 4

Бренд: Linkskey Страницы: 2

IDS-105FE Series

Бренд: Perle Страницы: 2

CT-HDVD-4X14K-SW

Бренд: NB Страницы: 23

Бренд: ATEN Страницы: 261

Бренд: Gigacore Страницы: 8

Allen-Bradley Guardmaster 440G-LZ

Бренд: Rockwell Automation Страницы: 40

Бренд: Kramer Страницы: 39

Бренд: Hirschmann Страницы: 8

Бренд: TRENDnet Страницы: 19

Бренд: Black Box Страницы: 2

S5200F-ON Series

Бренд: Dell EMC Страницы: 57

Бренд: Wise Страницы: 100

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды