HPE OfficeConnect 1850 Series Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 97

background image

Configuring Interfaces as VLAN Members

49

Table 21. VLAN Port Membership Fields

To configure port membership to the selected VLAN, select one or more ports and click

Edit

. Or, click

Edit All

to configure all ports at the same time.

On the

Edit VLAN Port Membership

page, configure the

Participation/Tagging

setting to specify

whether the ports are excluded from the VLAN or are included as a tagged or untagged member.

Click

Apply

to save any changes for the currently selected VLAN. The changes take effect immedi-

ately but are not retained across a switch reset unless you click

Save Configuration

.

Field

Description

VLAN ID

Select the VLAN ID for which you want to view interface memberships.

Interface

The port or trunk ID.

Participation/Tagging

The current membership mode and tagging behavior for each port in this VLAN, which is one

of the following:



Exclude—The port is not configured to be a member of the selected VLAN.



Tagged—The port is a tagged member of the selected VLAN. When frames in this VLAN

are forwarded on this port, the VLAN ID will be included in the frame’s Ethernet header.



Untagged—The port is an untagged member of the selected VLAN. When frames in this

VLAN are forwarded on this port, the VLAN ID will not be included in the frame’s Ether-

net header.

NOTE:

Consider the following guidelines when editing VLAN port memberships and settings:



A port can be an untagged member of only one VLAN. If you change the VLAN that a port is an
untagged member of, then the port will be excluded from the VLAN where it was previously an
untagged member. A port can be a tagged member of multiple VLANs.



All ports must be a member of at least one VLAN, as either a tagged or an untagged member.
You cannot exclude a port from a VLAN unless the port is a member of at least one other VLAN.



If you exclude a port from the management VLAN, a computer connected to the switch via that
port will be unable to access the switch management interface.



Ports belonging to a trunk cannot be assigned membership in a VLAN, although the trunk itself
can be a member of one or more VLANs. When a member port is added to a trunk, it loses any
previous VLAN memberships and acquires those of the trunk. When deleted from a trunk, a port
loses the VLAN memberships of the trunk and acquires untagged membership in VLAN 1.

«
...
47
48
49
50
51
...
»

Содержание OfficeConnect 1850 Series


































































































Отзывы:

Нет отзывов

Похожие инструкции для OfficeConnect 1850 Series

TNS5500D Series

Бренд: 3onedata Страницы: 5

IPS7112G-4GS-8GPOE

Бренд: 3onedata Страницы: 3

COOPER POWER SERIES

Бренд: Eaton Страницы: 24

COOPER POWER SERIES

Бренд: Eaton Страницы: 16

Crouse-hinds series

Бренд: Eaton Страницы: 16

Cutler-Hammer AMPGARD

Бренд: Eaton Страницы: 4

Бренд: Zigen Страницы: 40

Бренд: Zigen Страницы: 4

Бренд: Matrix Switch Corporation Страницы: 60

Бренд: socomec Страницы: 43

MatrixPRO 8x8 DVI

Бренд: Barco Страницы: 2

Бренд: Quartz Страницы: 43

velatia cgm.3 system

Бренд: Ormazabal Страницы: 76

Бренд: DANLERS Страницы: 2

InSwitch ISM-P Series

Бренд: InHand Страницы: 81

Бренд: SEH Страницы: 40

Бренд: DVIGear Страницы: 11

Бренд: Kramer Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды