HPE OfficeConnect 1850 Series Скачать руководство пользователя страница 52

Страница: 52 / 97

Page 52

Trunk Configuration

You can use the Trunk Configuration page to view and edit trunks. The number of trunks on the system
is fixed, and all trunks are disabled by default. You can enable, disable, and edit settings for each
trunk. Click

Trunk

Trunk Configuration

in the navigation pane.

Figure 30. Trunk Configuration Page

The following information displays for each trunk.

Table 23. Trunk Configuration Fields

Field

Description

Trunk

The trunk ID.

Name

The configurable trunk name, which is the same as the trunk ID by default.

Type

Trunks can be either dynamic or static, but not both:



Dynamic—Dynamic trunks use the Link Aggregation Control Protocol (LACP, IEEE

standard 802.3ad). An LACP-enabled port automatically detects the presence of other

aggregation-capable network devices in the system and exchanges Link Aggregation

Control Protocol Data Units (LACPDUs) with links in the trunk. The PDUs contain infor-

mation about each link and enable the trunk to maintain them.



Static—Static trunks are assigned to a bundle by the administrator. Members do not

exchange LACPDUs. A static trunk does not require a partner system to be able to

aggregate its member ports. This is the default port type.

Note that the loop protection feature is not supported on dynamic trunks. If loop protection is

enabled on a static trunk and the trunk is changed to a dynamic trunk, loop protection is

disabled.

Admin Mode

Whether the trunk is administratively enabled or disabled. This feature is enabled by default.

Link Status

Indicates the operational status of the trunk interface, which can be Up, Up (SFP) for ports

with an installed SFP transceiver, or Down.

Members

The ports that are members of the trunk. By default, no ports belong to any trunk.

Active Ports

The ports that are actively participating members of a trunk. A member port that is

operationally or administratively disabled or does not have a link is not an active port.

Содержание OfficeConnect 1850 Series


































































































Результаты поиска

Содержание OfficeConnect 1850 Series

Отзывы:

Похожие инструкции для OfficeConnect 1850 Series

Бренды по названию

Популярные бренды

HPE OfficeConnect 1850 Series, Руководство по управлению и настройке

Результаты поиска

Содержание OfficeConnect 1850 Series

Отзывы:

Похожие инструкции для OfficeConnect 1850 Series

Бренды по названию

Популярные бренды