HP Z230 SFF Workstation Скачать руководство пользователя страница 114

Страница: 114 / 127

A Linux technical notes

HP offers a variety of Linux solutions for HP workstation customers:

●

HP certifies and supports Red Hat Enterprise Linux (RHEL) on HP workstations.

●

HP certifies SUSE Linux Enterprise Desktop (SLED) on HP workstations.

●

HP offers a SLED preload on some workstations.

For Linux setup and restore procedures, see the user guide for your workstation at

http://www.hp.com/support/workstation_manuals

Topics

System RAM on page 104

Audio on page 104

Network cards on page 105

Hyper-Threading Technology on page 105

NVIDIA Graphics Workstations on page 106

AMD Graphics Workstations on page 107

NOTE:

After you set up the operating system, make sure that the latest BIOS, drivers, and software

updates are installed.

CAUTION:

Do not add optional hardware or third-party devices to the workstation until the operating

system is successfully installed. Adding hardware might cause errors and prevent the operating

system from installing correctly.

System RAM

HP supports different amounts of total RAM in various HP workstations, based on the number of

hardware DIMM slots and the capabilities of the system. The total memory supported for each

configuration is listed in the

Hardware Support Matrix for HP Linux Workstations at

http://www.hp.com/support/linux_hardware_matrix

Audio

All HP workstations come with built-in audio hardware. The audio hardware is supported by the

Advanced Linux Sound Architecture (ALSA) drivers included with all modern Linux distributions.
The audio hardware provides basic playback and recording features. The ability to simultaneously

play audio from multiple sources, such as applications and CDs, is provided in the ALSA driver that

provides audio mixing. The performance of software audio mixing and playback is greatly improved in

ALSA version 1.0.13 and later.
After the driver is installed, the optional NVIDIA and AMD graphics cards that are supported in HP

workstations also provide audio functionality over HDMI. The signal can be passed through the

DisplayPort connector to a monitor with audio capabilities. The vendor driver must be installed. Such

104 Appendix A Linux technical notes

Содержание Z230 SFF Workstation
































































































































Результаты поиска

Содержание Z230 SFF Workstation

Отзывы:

Похожие инструкции для Z230 SFF Workstation

Бренды по названию

Популярные бренды

HP Z230 SFF Workstation, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Z230 SFF Workstation

Отзывы:

Похожие инструкции для Z230 SFF Workstation

Бренды по названию

Популярные бренды