HP Workstation xw4100, Сервисное и техническое руководство

Страница: 88 / 194

5–10 hp workstation xw4100 service and technical reference guide
system diagnostics and troubleshooting
microprocessor
error code description recommended action
0101-xx CPU test failed. The following steps apply to 0101-xx through
0102-xx:
1. Run Computer Checkup or Computer
Setup and retest.
2. Replace processor and retest.
3. Replace the system board and retest.
0102-xx Coprocessor error.
0103-xx DMA controller failed. The following step applies to 0103-xx
through 0106-xx:
Replace the system board and retest.
0104-xx Interrupt controller failed.
0105-xx Port error.
0106-xx Keyboard controller self-test
failed.
0107-xx CMOS RAM test failed. The following steps apply to 0107-xx through
0110-xx:
1. Replace the battery/clock module and
retest.
2. Replace the system board and retest.
0108-xx CMOS interrupt test failed.
0109-xx CMOS clock test failed.
0110-xx Programmable timer test
failed.
0113-01 Protected mode test failed. Replace the system board and retest.
0114-01 Speaker test failed. Verify the speaker connection.
Replace speaker (if applicable) and retest.
Replace the system board and retest.
0199-xx Installed devices test failed. Check system configuration.
Verify cable connections.
Check switch settings.
Run Diagnostics utility.
Remove all devices except processor and
replace one-at-a-time until a failure occurs.
Replace the system board.