manualshive.com logo in svg

HP Workstation xw4100, Сервисное и техническое руководство

Поделиться
Скачать
HP Workstation xw4100 Скачать руководство пользователя страница 20

2–4

hp workstation xw4100 service and technical reference guide

installing or restoring the operating system

Certain drivers and utilities are available only in selected languages. You can obtain the latest 
version of these files, in English and selected other languages, in one of three ways:

■

Support Software CD 

■

HP Web site at

 www.hp.com

■

Restore Plus! CD, which is supplied with Windows-based workstations

■

hp workstations Red Hat Linux with hp additions CD, which is supplied with Linux-based 
workstations

NOTE: 

Additional HP software may be required in certain situations.

2.2  restoring the operating system

The following sections discuss the procedures for restoring the operating system and applications 
software.

2.2.1 Microsoft Windows 2000 Professional and Windows XP 

Professional

Restore the original operating system and factory-installed software by using the Restore Plus! 
CD and the OS CD that came with the workstation. Carefully read and follow the instructions 
provided with the Restore Plus! CD.

2.2.2 Red Hat Linux

Should a recovery of the OS or software be required, insert the hp workstations Red Hat Linux 
with hp additions (Binary Disk 1/3) CD and follow the prompts on the screen to successfully 
complete the recovery process.

2.3  protecting the software

To protect software from loss or damage, you should keep a backup copy of all system software, 
applications, and related files stored on the hard drive. See the operating system or backup utility 
documentation for instructions on making backup copies of data files.

2.4 ordering 

backup 

software

All software that shipped with the workstation, including the Restore Plus! CD, can be ordered 
from HP as a single set, or you can order the various software packages separately.

NOTE: 

Before calling HP to order the software, be sure to have the serial number of the 

workstation available. This number is necessary for all diskette orders. See the “serial number 
and COA label location” section in Chapter 1, for the location of the serial number on the 
workstation.

Содержание Workstation xw4100



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды