HP Workstation xw4100, Сервисное и техническое руководство

Страница: 37 / 194

hp workstation xw4100 service and technical reference guide 3–17
system management
Remote Wakeup allows the network interface controller to continue functioning when power to
the workstation has been turned off, but the power cord is still connected to an electrical outlet.
NOTE:
The workstation continues to consume a small amount of electricity even after you turn it
off. Only when you disconnect the power cord from the electrical outlet does the workstation
stop consuming electricity.
To enable Remote Wakeup and Remote Shutdown, complete the following steps:
1. Double-click the Network Icon, located in the Control Panel.
2. Double-click the appropriate network controller.
3. Click the Advanced Properties tab.
4. Select Remote Wakeup.
5. Change the value to ON.
6. Click OK to save and apply changes, then click OK to exit the Network dialog.
For more information on using Remote Wakeup and Remote Shutdown, refer to the online
Remote Management Administrators Guide. The Remote Management Administrators Guide is
included with the Remote Management Setup Utilities, and is available on the HP Web site at
www.hp.com .
NIC Alert
The NIC Alert function enables desktop PCs to send an immediate alert to the network
administrator when there is a hardware or operating system failure, or evidence of tampering.
An alert will be sent even if the system is powered off or the operating system has not yet started.
replicating your setup
This procedure gives an administrator the ability to easily copy one setup configuration to other
workstations of the same model. This allows for faster, more consistent configuration of multiple
workstations. To replicate your setup:
1. Access the Computer Setup Utilities menu.
2. Click File > Save to Diskette. Follow the instructions on the screen.
NOTE:
This requires an internal diskette drive or a portable, external diskette drive.
3. To replicate the configuration, click File > Restore from Diskette, and follow the instructions
on the screen.
Altiris eXpress and PC Transplant make it easy to replicate the configuration and custom settings
of one PC and copy it to one or more PCs. For more information, visit the HP Web site at
www.hp.com
.