HP Workstation xw4100, Сервисное и техническое руководство

Страница: 159 / 194

hp workstation xw4100 service and technical reference guide F–1
F
power cord set requirements
The power supply for this workstation has a power switch. This feature allows the workstation to
be operated on an input voltage of 100-200V or 200-400V.
The power cord set (flexible cord or wall plug) received with this product meets the requirements
for use in the country where you purchased the equipment.
If you need to obtain a power cord for a different country, you should purchase a power cord that
is approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked on the
product’s electrical ratings label. The voltage and current rating of the cord should be greater
than the voltage and current rating marked on the product. In addition, the diameter of the wire
must be a minimum of 0.75 mm
2
or 18AWG, and the length of the cord must be between 6 feet
(1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact the
HP authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed
upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point
where the cord exits from the product.