HP Vectra XA 5 Series, Руководство пользователя

Страница: 70 / 130

3 The HP Setup Program
Configuring Your Network Connection
58 English
Configuring Your Network Connection
Use the information in this section if your PC comes with an HP-
supplied integrated network solution. Use this section if you have
trouble configuring your network connection or if you need help in
using your PC’s power management with your network.
You must use the PC's Setup program to change the integrated
Ethernet interface settings.
You should be familiar with how to start and use the Setup program
(refer to "Using the Setup Program", on page 42).
The following table summarizes which network options you can set
using the
Setup program.
1. For full information on setting up your network, refer to the Network Administrator’s Guide
which comes with your PC.
Network Setup Items
1
Where to find in Setup
Enable the integrated network interface. "USB Devices Submenu (Configuration
group)", on page 50.
Enable network access to information on your PC. "Integrated Ethernet Interface", on page 53.
Enable your PC to be started (booted and logged
on) from the network. "Start from Network", on page 54.
From “Suspend Wakeup” mode, enable your PC to
return to full power when a command is received
by the integrated network interface. "Power Menu Items", on page 55 (refer to
“Integrated Network” setup item).
Enable remote power-on of your PC. "Power Menu Items", on page 55 (refer to
“Power-on Network” setup item).