HP Vectra XA 5 Series, Руководство пользователя

Страница: 61 / 130

English 49
3 The HP Setup Program
Understanding the SETUP Program
1. If an asterisk (*) appears in front of this value, then you will see the following message in the
lower part of the screen:
[*] = The device is disabled for security reasons. To enable it,
use the Security/Hardware Protection menu.
(Refer to the Hardware Protection submenu under the Security group.)
Integrated Network Interface Submenu (Configuration group)
Setup Item Default
1
Action
Integrated Ethernet Interface [Enabled] Enables or disables the integrated
LAN interface.
PCI Devices Submenu (Configuration group)
Setup Item Default Action
Slot #1 Bus Master
Slot #2 Bus Master
Slot #3 Bus Master
[Enabled]
[Enabled]
[Enabled]
Enable this option if you need the
BIOS to set the PCI Bus Master bit.
This could be necessary for some
older PCI accessory boards.
PCI IRQ line 1
PCI IRQ line 2
PCI IRQ line 3
PCI IRQ line 4
[Auto]
[Auto]
[Auto]
[Auto]
Select an IRQ number only if
necessary (for example for
SCO-UNIX).