HP Tc2110 - Server - 128 MB RAM, Руководство по обслуживанию

Страница: 40 / 118

Chapter 3 Installing and Configuring
Removing the Processor
1. If you have not removed the heat sink-cooling fan assembly, do so now before continuing.
CAUTION
Wear a wrist-strap and use a static-dissipating work surface connected to the chassis
when handling components. Ensure the metal of the wrist-strap contacts your skin
2. Open the ZIF (Zero Insertion Force) lever completely to allow removal of the processor.
Figure 3-16. Removing the Processor
3. Grasp the processor by its edges and lift it out of the processor socket.
4. Place the processor on a static-dissipating work surface or into an anti-static bag.
Replacing the Processor
1. Locate the pin-1 marker on the processor before installing the processor.
2. Open the ZIF lever to allow access to the processor socket.
Pull the ZIP lever up and away from the ZIF socket and then raise it to a full 90
°
to the system board.
3. Align the processor over the empty processor socket.
The socket has a mark for pin-1 that should match the mark for pin-1 on the processor near the end of
the ZIF lever.
CAUTION
Ensure that you align pin-1 of the processor with pin-1 of the processor socket or pin
damage will occur.
34