Figure 3-1. Air Flow through the System/E
When the proper system is installed, internal temperature rise is typically less than 15C (27F) over
ambient temperature.
NOTE
Hewlett-Packard recommends that the customer monitor the internal temperature of the
rack. The internal temperature should not exceed the heat rating of any installed instruments.
Installing Rail Mounted Equipment into the Rack
Equipment is installed by first attaching equipment rails between both front and rear columns, as shown in
Figure 3-2. A clip nut goes behind the rail and a spacer block at the top hole the EIA unit. This is the same
hole the screw lines up with.
Figure 3-2. Attaching Rail to Column
12
Chapter 3
Installation Guidelines
