manualshive.com logo in svg

HP System/E25, Руководство пользователя, Страница: 10 / 42

Поделиться
Скачать
HP System/E25 Скачать руководство пользователя страница 10

Heavy-Duty Casters

Each System/E is provided with four,
7.6 cm (3 in) diameter, smooth rolling,
heavy-duty urethane casters to facilitate
moves over short distances. The casters
are rated at 454.5 kg (1000 lbs) per
caster.

CAUTION

A fully loaded cabinet’s maximum gross weight of 995 kg (2188 lbs) can overload a raised floor.

Leveling Feet

Four adjustable leveling feet come with
the rack for stability and leveling.
Levelers are located in each corner to
level and stabilize the rack. For maxi-
mum accuracy, use a level while adjust-
ing the feet.

Rear Door

The rear door comes installed from the
factory. Standard is a right-opening, per-
forated rear door with a lockable slam
latch and sheetmetal catch providing
ventilation and security. The rear door
can be mounted to open from either the
left or the right. They are perforated for
maximum airflow. They lift on and off
their hinges when open to about 45
degrees. The 1.96 m door weighs 11.8
kg (26 lbs). The 1.6 m rear door weighs
9.1 kg (20 lbs). The 1.25 m rear door
weighs 7.7 kg (17 lbs).

6

Chapter 2 

Description

Содержание System/E25











































Отзывы:

Нет отзывов