Monitor Mount Kit
An optional universal monitor rack mount kit is available. A shelf that can be mounted for a sitting, or
standing operator. The shelf has channels cut from it that accommodate the securing clamps.
Universal Mounting Rails
Some equipment is supported by and anchored to universal rails made of cold rolled steel that weigh 2.7
kg (6 lbs) and support up to 68.2 kg (150 lbs). Hollow metal blocks have lips that fit into the support rails
and holes for screws. The blocks are slid into contact with the equipment, and are then attached to the rail
with screws.
Spacers are fit between the rails and the columns.
Ballast
Ballast is available in 30 lb. and 120 lb. kits, and may be required when using slide-mounted products
and/or keyboard/ work surface products. Use the stability work sheets to determine ballast requirements.
CAUTION
Do not ship racks with ballast installed.
CAUTION
Always mount ballast in the rear of the rack.
NOTE
The anti-tip feet are not a substitute for ballast.
10
Chapter 2
Description
