31
Installing Front Door
Contents
1
Front Door
1
Latch, Slam Assy
1
Latch -Catch
1
Cable, Door Ground Assy
6
Machine Screws
1
Contact, single, male
2
Hinge, Front
2
Ext Lock Washers
4
Ext Lock Washers w/ nut
3
Bumper Feet
Tools Needed:
Torx 25 Driver
STEP 1
Secure Power.
Turn off all equipment in the rack, if necessary, taking
necessary precautions to prevent data loss. Secure
main power to the rack.
STEP 2
Install hinges.
The front left column has pre-installed threaded
inserts for the hinges. The left front column has
threaded inserts positioned to accept machine screws
at the 11th and 15th holes down from the top, and the
6th and 10th holes up from the bottom. Position the
hinges on the left column and and secure with
machine screws.
Chapter 4
Procedures
STEP 3
Install the latch catch.
The right front column has pre-installed threaded
inserts positioned to accept latch bolts at these
locations:
1.96m
39th and 43rd from top
Position the latch on the right column and secure with
machine screws.
STEP 4
Install the door.
The door has pins attached to it that fit onto the holes
in the hinges. Open the door to approximately 90
degrees and lower the door pins onto the two hinges.
41
11 th
15 th
10 th
6 th
