HP Surestore 160ex - Optical Jukebox, Руководство по обслуживанию, Страница: 67 / 230

Operation and Configuration
Setting an Operating Configuration
Chapter 3 3-21
Operation
and
C
onf
ig
urat
io
n
Configurations are described in the following table.
Table 3-1 Configuration Choices
Configuration
Name Description
RECOVERY
ON/OFF
Toggles between
ON
and
OFF
. If set to
ON
, the
jukebox attempts to recover from errors. If set
to
OFF
, the jukebox immediately stops moving
if an error condition occurs. The default
configuration is
RECOVERY ON
, and recovery
should remain
ON
under normal conditions.
RESTORE
DEFAULTS
Sets all jukebox configurations to default
settings.
CLEAR
ODOMETERS
Sets all jukebox odometers to zero.
DUAL PICKER
ON/OFF
Toggles between
ON
and
OFF
. If set to
ON
, the
jukebox runs with dual picker addressing
ON.
If set to
OFF
, the jukebox runs with dual picker
addressing
OFF
. The default setting is
DUAL
PICKER ON
and this mode should remain
ON
under normal conditions. Single and
dual-picker addressing is described in Chapter
6 on page 6-18.
STARWARS
ON/OFF
Toggles between
ON
and
OFF
. If set to
ON,
the
vertical sensors are enabled. If set to
OFF,
the
vertical sensors are disabled The default
configuration is
ON
and should remain
ON
during normal operation.
NEW PASSWORD
Allows changing the numerical password
required to access the menu choices under the
ADMIN *
menu on the jukebox control panel.
Menu choices include configurations, tests, and
information logs. To change the security code,
see “Changing the Administration Menu
Password” on page 13.