manualshive.com logo in svg

HP StorageWorks MSA 2/8 - SAN Switch, Справочное руководство

Поделиться
Скачать
HP StorageWorks MSA 2/8 - SAN Switch Скачать руководство пользователя страница 429

msConfigure

429

Fabric OS Version 3.1.x/4.1.x Reference Guide

Configure the Management Server.

Synopsis

msConfigure

Availability

Admin 

Release

V3.1.x and V4.1.x

Description

Use this command to display and configure parameters used to access the 
Management Server. The Management Server allows a storage area network 
(SAN) management application to retrieve and administer fabric and interconnect 
elements such as switches. It is located at the Fibre Channel address, FFFFFAh. 

If the Access Control List (ACL) is empty (this is the default value), the 
Management Server is accessible to all systems connected in-band to the fabric. 
To restrict access, specify the World Wide Name (WWN) for one or more 
management applications; access is then restricted to those WWNs. Up to 16 
maximum WWNs are supported in ACL. 

The ACL is implemented on a per switch basis and should be configured on the 
switch to which the management application station is directly connected.

This command is interactive and provides the following choices:

If a change is made, you are prompted to save the changed ACL to non-volatile 
memory. The saved ACL is restored on future reboot.

msConfigure

0  Done (with the administration)

1  Displays the Access Control List (ACL)

2  Add member based on its Port/Node WWN

3  Delete member based on its Port/Node WWN

Содержание StorageWorks MSA 2/8 - SAN Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды