manualshive.com logo in svg

HP StorageWorks MSA 2/8 - SAN Switch, Справочное руководство

Поделиться
Скачать
HP StorageWorks MSA 2/8 - SAN Switch Скачать руководство пользователя страница 422

Fabric OS Commands

422

Fabric OS Version 3.1.x/4.1.x Reference Guide

Displays multicast routing information.

Synopsis

mcastShow [group_ID]

Availability

All users.

Release

V3.1.x

Description

Use this command to display the multicast routing information, as it is known by 
the FSPF path selection and routing task, for all ports in the switch. The multicast 
routing information indicates, for each multicast group, all the ports that are 
members of that group; that is, ports that are able to send and receive multicast 
frames on that group.

The multicast routing information is shown for all the multicast groups, or for a 
specific group if a group ID is supplied.

Normally, an F_Port or FL_Port is a member of the multicast group only if it has 
joined the group using the Alias Server protocol. On the other hand, E_Ports that 
are part of the multicast group are selected by the multicast path selection 
protocol. They are chosen in a way that prevents multicast routing loops.

The multicast paths are active for all the multicast groups at all times, regardless 
of whether a multicast group contains any members.

The multicast routing information is shown as a set of bit maps. Each bit in the bit 
map represents a port, with the least significant bit representing port 0. A bit set to 
1 indicates that a port is part of the multicast distribution tree.

mcastShow

Содержание StorageWorks MSA 2/8 - SAN Switch























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды