manualshive.com logo in svg

HP StorageWorks 7100 - Virtual Array, Приложение, Страница: 3 / 27

Поделиться
Скачать
HP StorageWorks 7100 - Virtual Array Скачать руководство пользователя страница 3

Event 

Number 

(dec/hex) 

Event 
Name 

Logged? 

Predictive 

Maintenance 

Implication 

Suspected 
Components 

Mf

g Fail? 

Description 

provided by 

drive vendor 

CHECK_CONDITION, MEDIA_ERROR.  The 
PDD’s retries are exhausted.  The PDD may or may 
not have attempted a REASSIGN BLOCKS 
command. 

24/0x18 

Disk Drive Hardware Error 

Y 

See information 

provided by 

drive vendor 

Disk Drive 

N 

The disk drive returned a status of 
CHECK_CONDITION, HARDWARE_ERROR.  
The PDD’s retries are exhausted or the the I/O is not 
retryable. 

25/0x19 

Disk Drive Reset By Related 
Hot Plug 

N 

N.A. 

None 

N 

A device sharing the same backend bus as this drive 
was either inserted or removed causing a bus reset.  
The ID returned status of HOT_RESET_ID for this 
I/O.  The PDD could not retry this I/O either 
because it is not retryable, or its retries were 
exhausted. 

26/0x1a 

Disk Drive Reset Itself 

Y 

Ingore if 

accompanied by 

hot plug. 

Disk Drive 

N 

The disk drive returned a status of 
CHECK_CONDITION, UNIT_ATTENTION, 
PWR_ON_RESET.  The PDD could not retry this 
I/O.  If there wasn’t already a reconfiguration in 
progress when the PDD got the callback for this I/O, 
the PDD used the JCB for this I/O to reconfigure the 
drive; the UNIT ATTENTION condition has 
already been cleared.  Recommend that the client 
retry the I/O. 

27/0x1b 

Disk Drive Reset by Pass 
Through 

Y 

Ignore 

None 

N 

A passThruReset occurred.  The PDD could not 
retry this I/O. 

28/0x1c 

Disk IO Failed Due To Drive 
Removal 

N 

N.A. 

None 

N 

Subsequent to a hot removal, the PDD’s destroy 
method was invoked.  I/Os in the PDD’s waiting 
queue are flushed with this status.  Active I/Os 
which complete with good status, after the destroy 
method is invoked, but which executed during a 
device configuration, will also be returned with this 
status.  (Active I/Os which complete with good 
status status and not concurrent with device 
configuration will be returned with good status.) 

29/0x1d 

Disk Drive Failed Initialization 

Y 

N.A. 

None 

Y 

A disk drive failed the reconfiguration attempt 
(TUR, inquiry, mode sense, mode select, read 
capacity).  The PDD attempted a device 
reconfiguration after the device was reset during the 
normal course of operation (i.e. not during a hotplug 
of this drive, but possibly during a hotplug of 
another drive).  If the device reconfiguration fails, 
the PDD flushes all non-passthru I/Os from its 
waiting queue with this status.  The I/O whose JCB 
was used for the config is also returned with this 
status.  If there was active I/Os concurrent with the 
config, it is also returned with this status. 

30/0x1e 

Disk I/O Failed Due To 
Related Hot Plug 

Y 

Ignore. 

None 

N 

The I/O executed concurrently with a device 
reconfiguration.  The state of the drive was 
unknown (danger of write cache being enabled.) 
The I/O was not retryable or the PDD’s retries are 
exhausted.  The I/O should be retried by the client. 

31/0x1f 

Unexpected Disk Drive Error 

Y 

Single 

Occurrance 

Unless Excluded 

For Drive Type 

Disk Drive 

N 

The drive returned CHECK CONDITION status 
with meaningless sense data, or sense data not 
otherwise handled by the PDD’s error recovery 
algorithms.  The PDD’s retries are exhausted or the 
I/O is not retryable. 

32/0x20 

Invalid SLRC transition 

N 

N.A. 

None 

N 

An attempt was made to change the SLRC mode 
parameter from a value of AutoRAID to RAID1 
while LUNs were configured in the subsystem.  This 
transition cannot be made unless no LUNs are 
configured. 

33/0x21 

Disk Drive Miscompare on 
Write And Verify 

Y Single 

Occurrance 

Disk Drive, 
Controller, Disk 
Interface 

N 

The disk drive returned a MISCOMPARE error 
status.  The PDD’s retries are exhausted or the I/O is 
not retryable. 

34/0x22 

Disk Drive State Conflict 

Y 

Ignore 

None 

N 

The PDM was in the wrong state for read, write or 
pass thru.  down, missing or initialization failed.  
missing. 

35/0x23 

Disk Drive Data Out Of Sync 
After Access 

Y 

Ingore - See 

accomapnying 

errors 

None 

N 

Data being read or written on a device through the 
PDM was out of sync after the access was complete. 

36/0x24 

Illegal Drive State For Down 

N 

N.A. 

None 

N 

A state conflict was detected in an attempt to down 

Содержание StorageWorks 7100 - Virtual Array




























Отзывы:

Нет отзывов